Welcome, Guest. Please login or register.
June 22, 2017, 07:22:43 am
Home Help Search Login CONTACT Register
News: http://sailboatdata.com/bbs/index.php?type=rss;action=.xml;sa=news;board=11.0;limit=20

+  SailboatData.com - Forum
|-+  Recent Posts
Pages: [1] 2 3 ... 10
 1 
 on: June 12, 2017, 03:02:53 pm 
Started by SPB - Last post by SPB
The Schock 35 lists Shad Turner as the designer.  Shad designed the Santana 35, which was later modified by Steve Schock with a new bow, new keel, and masthead rig to make the Schock 35.  I don't think Shad was involved in the modifications.  So maybe the boat should be listed as a "W. Shad Turner/Steve Schock" design.

 2 
 on: June 09, 2017, 10:40:43 am 
Started by pcroxford - Last post by SerbTift
Предлагаем купить промышленну вентиляцию по низкой цене со склада в Киеве. Гарантия производителя 5 лет. Скидка 10% с купоном "ALFAVENT"
 
http://alfa-vent.com.ua/provetrivatel-vents-tvinfresh-r-50

 3 
 on: June 08, 2017, 11:08:33 pm 
Started by Adelie - Last post by Adelie
http://www.sailboat-data.com/en/sailboat/168-jeanneau-tonic-23

 4 
 on: June 05, 2017, 08:26:15 am 
Started by Judy Blumhorst - Last post by Judy Blumhorst
Hi Randy, 

The correct area for a Sunfish lateen sail is 82 sf, 
The dimensions are Luff 13.33' , foot: 13.33', leech 14.33' 
Upper and lower spars are 13.73' per the class rules.  A quick visual check of a photo of a sunfish sail will confirm that the leech is longer than the luff and foot and that the area of the sail has a leech longer than 13.33'

The area of the Sunfish lateen sail has long been incorrectly reported to be 75sf in many sources.  That's the area of a 2D isosceles triangle whose 3 sides are 13.33'.   However, the three sides of the sail do not form an isosceles

The class is tightly controlled by Laser Performance, the manufacturer.  Class legal sails must be bought through authorized distributors.  The class doesn't publish the dimensions for the sail.   Non-class legal sails from other manufacturers are available, along with do-it-yourself kits from Sailrite.

Regards,
Judy Blumhorst
Sailmaker
www.Hydesailsdirect.com


 5 
 on: May 16, 2017, 12:19:47 pm 
Started by sonosail - Last post by sonosail
http://www.sailboatdata.com/viewrecord.asp?class_id=7834

 6 
 on: May 15, 2017, 03:12:17 pm 
Started by sonosail - Last post by sonosail
http://www.sailboatdata.com/viewrecord.asp?class_id=5881

 7 
 on: May 08, 2017, 12:31:00 pm 
Started by chris95040 - Last post by chris95040
Beam is still wrong - it's not 12.5'.  Its 10.75.


 8 
 on: March 24, 2017, 06:31:12 am 
Started by dansailv - Last post by dansailv
the ridas factory produces the following other models as well: Ridas 46 (Deck Salon/ racer), Ridas 33, Ridas 31 and ridas 26. All of these and the 35 can be found on: ridasyacht.com

Ridas 35:
The first one built was in 1996.
The sail area is 70 square metres.
The ballast is, as I said 2.1 tonnes

Would you like to add/correct these values on the ridas 35 page?

Thank you
.

 9 
 on: March 19, 2017, 12:44:28 am 
Started by dansailv - Last post by dansailv
Could the ballast and the ballast ratio be filled in please?

 10 
 on: December 21, 2016, 03:41:19 pm 
Started by sonosail - Last post by sonosail
Update of record thanks to Bruce Handmer.

http://www.sailboatdata.com/viewrecord.asp?class_id=7696

Pages: [1] 2 3 ... 10


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 2.0 Beta 4 | SMF © 2006–2008, Simple Machines LLC Valid XHTML 1.0! Valid CSS!