Welcome, Guest. Please login or register.
July 21, 2017, 09:48:43 am
Home Help Search Login CONTACT Register
News: http://sailboatdata.com/bbs/index.php?type=rss;action=.xml;sa=news;board=11.0;limit=20

+  SailboatData.com - Forum
|-+  Recent Posts
Pages: 1 [2] 3 4 ... 10
 11 
 on: July 05, 2017, 07:57:17 am 
Started by 345-000 - Last post by sonosail
Hi,

Just wanted to bring the Swede 38 to your attention. Not tobe confused with the Sweden Yachts 38, it was designed by Paul Elvstr÷m and  Jan KjŠrulff along very much the same lines as the Aphrodite 101 and Bianca 414. Apparently initially built by Fiskars (Fiskars AB ), but taken over by Helmsman Yachts in 1980. Produced from 1979/80 - 1987.  Some nice photographs at http://boote.de/anzeigen/swede-38

Thanks very much.
Looking into it.

rb
sailboatdata.com

 12 
 on: July 04, 2017, 08:16:53 pm 
Started by Zeehond - Last post by Zeehond
Hi Randy,

As a real Huisman fan, I'm back with some additional info below about the Huisman 37 and Huisman 41 boats.

Huisman 37:

Hull Type: Fin w/spade rudder
Rig Type: Masthead Sloop
LOA: 11.25m
LWL: 9.05m
Beam: 3.64m
Draft: 1.98m
Displacement: 6550kgs
Ballast: 3100kgs

Designer: Jacques de Ridder
Builder: Huisman
Construct.: Aluminium
First Built: 1976
Last Built: 1981
# Built: 9 or 10

Engine:
Make: Volvo Penta
Model: MD 11C
Type: Diesel
HP: 23

Rig Dimensions:
I: 14.9m
J: 4.75m
P: 13.35m
E: 3.5m

The first boat from the series was built in 1976 with the name Sabina (now Chabibi). The layout of Sabina (Chabibi) differs a lot from that of the following Huisman 37 boats, which are much more like cruisers. Sabina was built as a one tonner and participated in the 1976, 1978 and 1980 One Tone Cup:

http://www.histoiredeshalfs.com/One%20Tonner/Sabina,%203%20bx.htm

Huisman 41:

Hull Type: Fin w/spade rudder
Rig Type: Masthead Sloop
LOA: 12.52m
LWL: 9.64m
Beam: 3.83m
Draft: 1.98m
Displacement: 10000kgs
Ballast: 5200kgs

Designer: Sparkman & Stephens
Builder: Huisman
Construct.: Aluminium
First Built: 1979

Rig Dimensions:
I: 15.66m
J: 5.3m
P: 14.0m
E: 4.7m


 13 
 on: June 12, 2017, 03:02:53 pm 
Started by SPB - Last post by SPB
The Schock 35 lists Shad Turner as the designer.  Shad designed the Santana 35, which was later modified by Steve Schock with a new bow, new keel, and masthead rig to make the Schock 35.  I don't think Shad was involved in the modifications.  So maybe the boat should be listed as a "W. Shad Turner/Steve Schock" design.

 14 
 on: June 09, 2017, 10:40:43 am 
Started by pcroxford - Last post by SerbTift
Предлагаем купить промышленну вентиляцию по низкой цене со склада в Киеве. Гарантия производителя 5 лет. Скидка 10% с купоном "ALFAVENT"
 
http://alfa-vent.com.ua/provetrivatel-vents-tvinfresh-r-50

 15 
 on: June 08, 2017, 11:08:33 pm 
Started by Adelie - Last post by Adelie
http://www.sailboat-data.com/en/sailboat/168-jeanneau-tonic-23

 16 
 on: June 05, 2017, 08:26:15 am 
Started by Judy Blumhorst - Last post by Judy Blumhorst
Hi Randy, 

The correct area for a Sunfish lateen sail is 82 sf, 
The dimensions are Luff 13.33' , foot: 13.33', leech 14.33' 
Upper and lower spars are 13.73' per the class rules.  A quick visual check of a photo of a sunfish sail will confirm that the leech is longer than the luff and foot and that the area of the sail has a leech longer than 13.33'

The area of the Sunfish lateen sail has long been incorrectly reported to be 75sf in many sources.  That's the area of a 2D isosceles triangle whose 3 sides are 13.33'.   However, the three sides of the sail do not form an isosceles

The class is tightly controlled by Laser Performance, the manufacturer.  Class legal sails must be bought through authorized distributors.  The class doesn't publish the dimensions for the sail.   Non-class legal sails from other manufacturers are available, along with do-it-yourself kits from Sailrite.

Regards,
Judy Blumhorst
Sailmaker
www.Hydesailsdirect.com


 17 
 on: May 16, 2017, 12:19:47 pm 
Started by sonosail - Last post by sonosail
http://www.sailboatdata.com/viewrecord.asp?class_id=7834

 18 
 on: May 15, 2017, 03:12:17 pm 
Started by sonosail - Last post by sonosail
http://www.sailboatdata.com/viewrecord.asp?class_id=5881

 19 
 on: May 08, 2017, 12:31:00 pm 
Started by chris95040 - Last post by chris95040
Beam is still wrong - it's not 12.5'.  Its 10.75.


 20 
 on: March 24, 2017, 06:31:12 am 
Started by dansailv - Last post by dansailv
the ridas factory produces the following other models as well: Ridas 46 (Deck Salon/ racer), Ridas 33, Ridas 31 and ridas 26. All of these and the 35 can be found on: ridasyacht.com

Ridas 35:
The first one built was in 1996.
The sail area is 70 square metres.
The ballast is, as I said 2.1 tonnes

Would you like to add/correct these values on the ridas 35 page?

Thank you
.

Pages: 1 [2] 3 4 ... 10


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 2.0 Beta 4 | SMF © 2006–2008, Simple Machines LLC Valid XHTML 1.0! Valid CSS!