|
|
|
| Hull Type: |
Fin w/transom hung rudder |
Rig Type: |
Masthead Sloop |
| LOA: |
27.00' / 8.23m |
LWL: |
23.92' / 7.29m |
| Beam: |
9.33' / 2.84m |
Listed SA: |
341 ft2 / 31.68 m2 |
| Draft (max.) |
5.17' / 1.58m |
Draft (min.) |
|
| Disp. |
6100 lbs./ 2767 kgs. |
Ballast: |
2400 lbs. / 1089 kgs. |
| SA/Disp.: |
16.39 |
Bal./Disp.: |
39.36% |
Disp./Len.: |
198.97 |
| Designer: |
Raymond Wall |
| Builder: |
Canadian Sailcraft (CAN) |
| Construct.: |
FG |
Bal. type: |
Iron /Lead |
| First Built: |
1975 |
Last Built: |
1983 |
# Built: |
480 |
|
AUXILIARY POWER (orig. equip.) |
| Make: |
Yanmar |
Model: |
|
| Type: |
Diesel |
HP: |
|
|
RIG DIMENSIONS
KEY |
| I: |
36.20' / 11.03m |
J: |
10.80' / 3.29m |
| P: |
30.00' / 9.14m |
E: |
9.70' / 2.96m |
| PY: |
|
EY: |
|
| SPL: |
|
ISP: |
|
| SA(Fore.): |
195.48 ft2 / 18.16 m2 |
SA(Main): |
145.50 ft2 / 13.52 m2 |
| Total(calc.)SA: |
340.98 ft2 / 31.68 m2 |
DL ratio: |
198.97 |
| SA/Disp: |
16.39 |
Est. Forestay Len.: |
37.78' / 11.51m |
| Mast Height from DWL: |
37.75' / 11.51m |
|
BUILDERS (past & present) |
| More about & boats built by: |
CS Yachts (Canadian Sailcraft) |
|
DESIGNER |
| More about & boats designed by: |
Raymond Wall |
|
NOTES |
The deep keel version had a 2,400 lb. Cast-iron fin keel bolted to the hull. The optional shoal draft model had a longer bolt-on lead keel casting weighing 2,800 lbs. About 90 boats were fitted with these lead fins.
In 1977, the rudder area was increased. CS also offered owners a rudder retrofit kit that added two inches to the forward edge to improve helm balance. Three years later, the mast was changed from a Proctor to an Isomat section, the fibreglass cabin sole was replaced with teak and holly , and cupboard doors were finished with woven cane fronts. The YSE Yanmar horizontal cylinder diesel engine was changed to a 1GM Yanmar. Holding tank capacity 32 gallons.
|
|
|
|
.