Optional engines: 2x 150 hp
Sail area:
Main – 1255 sqft – 117 m2
Genoa – 941 sqft – 87 m2
Rolly Tasker – Germany
Rigs: Cutter
Cutter Rig
Shoal draft: 5.25ft / 1.6m
Deck and interior redesign by Rob Ladd in early 2000’s includes a raised salon and elevated salon floor.
Images are from the updated version.
keel/cb version:
BU:5.25′ BD:9.83′
Deep draft version: 7.17′
Same hull as the original Tayana 55.
Upgraded version of the 1350 and 1360
Draft for twin keel version: 1.95m / 6.4ft
SA above is main + staysail.
Main = 54.5m²
Staysail = 28.5m²
Furling genoa = 62.5m²
Asymmetric spinnaker = 172m²
Overall length including bow sprit: 13m / 42.65ft
Optional water tank: 190 l / 50.19 gal.
Draft for twin keel version (spade rudder): 1.95m / 6.4ft.
SA above is main + staysail.
Main = 46m²
Staysail = 27m²
Furling genoa = 44m²
Asymmetric spinnaker = 150m²
Photo: Olivier Blanchet Photographie
Various shipyards. Plans sold with single construction license. Interior and deck layouts vary.
Length including pulpit: 14.21m / 46.62 feet.
Reported SA above = Main + Genoa
Sails:
Main: 36.5 sqm
Genoa: 68.0 sqm
Yankee: 47.0 sqm
Staysail: 28.8 sqm
Height from waterline to cabin top: 2.21m
Mast: estimated 16 m from deck
Various engines between 55 and 75 HP have been used.
Also has twin daggerboards located near the stern.
Also has twin daggerboards located near the stern.
Optional fuel = +378L / 99.86 gal.
55 OC is an open cockpit version.
Lifting keel: Draft – max 11.5ft / 3.5m; min 6.5 ft / 2m
Reported SA = Main + Yankee
Bruntons
