• Creator
    Topic
  • #84786
    ray
    Participant

    I want to place a boat on the list that is not there. What can I do?
    Aldebaran 8.15

    A sailboat that is build in Friesland the Netherlands during the period 1968-1978. Is there a form to do so?

Viewing 12 replies - 1 through 12 (of 12 total)
  • Author
    Replies
  • #84787

    Hello Ray, Please send any documentation you have on the Aldebaran 8.15 to contact@sailboatdata.com. Then, depending on what you send, we would be happy to add the boat to our database. So you know, we prefer not to use information from For Sale ads as they can vary from ad to ad and often have information which is not accurate.
    Thanks!

    #84788
    ray
    Participant

    Hi Bruce,

    I am happy to do so. First I need to make some rigging measurements, figures I do not know, and that you need. I cant make the math calculations, maybe you can. I am owner, and will update as soon as I finished the measurements. And an image.

    #84799
    ray
    Participant

    Ok, I did the measuring data of the Aldebaran 8.15 and emailed it to the contact address. Hope it fits.
    cheers, ray

    #84801

    Hi Ray, Sorry but we did not receive your email. Please check that you sent your email to contact@sailboatdata.com. Thanks,

    #84803
    ray
    Participant

    Hi, I used that mail. It came back with server issues. I re-mailed it to the adres you used . It starts with johnf
    cheers, ray

    #84807
    ray
    Participant

    So please,
    Let me know if it’s there, if not I can place it here -on the forum- if you like.

    #84809

    Sorry, we still did not receive your email.

    #84810
    ray
    Participant

    Aldebaran 8.15
    Hull Type:
    Clinker built (lapstrake) FULL GLASS handlay up
    KEEL
    Long Keel / S-bilge Masthead Sloop
    BALLAST Type
    Iron
    LOA:
    26.74 ft / 8.15m
    LWL:
    23.78 ft / 7.25m
    Beam:
    8.36 ft / 2.55 m
    S.A. (reported):
    73.26 ft/ 22.33 m2
    Draft (max):
    3.77 ft / 1.15 m
    Displacement:
    4,629 lb / 2100 kg
    Ballast:
    2204 lb / 1000 kg
    S.A./Disp.:
    Bal./Disp.:
    47.6
    Disp./Len.:
    1969
    Last Built:
    1978

    Built:

    104
    Builder:
    Jachtwerf Starreveld Lemmer Friesland (NL)
    Designer:
    Hans Starreveld
    Construction:
    FG hand layup
    First Built:

    Sailboat Calculations
    S.A./Disp.:
    Bal./Disp.:
    47,6
    Disp./Len.:
    Comfort Ratio:
    Capsize Screening Formula: S#:
    Rig and Sail Particulars
    I: 26.67 ft / 8.13 m :
    wide: 7.90 ft / 2.41m

    P: 24.21 ft/ 7.38 m

    E: 11.15 ft/ 3.40 m
    S.A. Fore:
    32.12 ft / 9.79 m2
    S.A. Main:
    41.14 ft / 12.54 m2
    S.A. Total (100% Fore + Main Triangles)
    73.26 ft/ 22.33 m2
    S.A./Disp. (calc.):

    Est. Forestay Len.:
    27.72 ft/ 8.45 m

    This clinker built sailboat in hand lay up FG is build as a finished boat and later also sold as a basic construction, so other builders and owners could finish her off. A principle with a blink to the Swedisch Folkboat, (she is build in the same period), in Friesland the Netherlands.
    engine : diesel engine 10 hp Arona AD 185 and others SW: 117 (lower numbers are faster)

    #84811
    ray
    Participant

    It is not so good, used, old, coffee… stains, but maybe it can help!

    #84812
    ray
    Participant

    This message was created automatically by mail delivery software.
    e
    A message that you sent could not be delivered to one or more of its
    recipients. This is a permanent error. The following address(es) failed:

    contact@sailboatdata.com
    retry timeout exceeded

    Reporting-MTA: dns; se23-yh.route25.eu

    Action: failed
    Final-Recipient: rfc822;contact@sailboatdata.com

    So here it is… the failure report. Your mail is not working properly.
    All best, ray

    #84813
    ray
    Participant

    errata

    Wide should be J: 7.90 ft / 2.41 mtr
    first build 1969
    last build 1978

    #84818

    Thanks for posting this. Not sure why the email did not work. I’ve tested it and everything seems fine. No matter, I have your information now.
    Again, thank you!

Viewing 12 replies - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.