Beta Marine

Sailboat Specifications

Hull Type: Fin w/spade rudder
Rigging Type: Masthead Sloop
LOA: 10.52 m
LWL: 9.09 m
S.A. (reported): 49.05 m²
Beam: 3.58 m
Displacement: 5,420 kg
Ballast: 2,268 kg
Max Draft: 1.70 m
Construction: FG
First Built: 1996
Last Built: 2008
Builder: Catalina Yachts (USA)
Designer: Frank Butler

Auxiliary Power/Tanks (orig. equip.)

Make: Universal
Model: M35
Type: Diesel
HP: 30

Sailboat Calculations

S.A. / Displ.: 16.22
Bal. / Displ.: 41.84
Disp: / Len: 200.98
Comfort Ratio: 22.22
Capsize Screening Formula: 2.06
S#: 2.60
Hull Speed: 7.32 kn
Pounds/Inch Immersion: 1,252.38 pounds/inch

calculation mobile

2 nd ad half width

3rd ad full width

Rig and Sail Particulars

I: 13.41 m
J: 4.11 m
P: 11.73 m
E: 3.66 m
S.A. Fore: 27.59 m²
S.A. Main: 21.46 m²
S.A. Total (100% Fore + Main Triangles): 49.05 m²
S.A./Displ. (calc.): 16.22
Est. Forestay Length: 14.03 m

Sailboat Links

Designers: Frank W. Butler
Builders: Catalina Yachts
Associations: Catalina 34 International Association
Download Boat Record:


Wing keel:
Draft - 1.3m / 4.25ft
Ballast - 2,544 kg / 5,600 lbs
Displacement - 5,693 kg / 12,550 lbs

Tall rig:
I - 14.02m / 46ft
P - 12.34m / 40.5ft

CATALINA 34mkII has a redesigned hull with a wider deck aft but the SAME as the earlier version at the waterline to allow one design racing.
All boats have a deck stepped mast with compression post.
Seats on the stern pulpit.
New head mold for better drainage and easier cleanup. Revised deck mold, elimination of dorade vents, lower traveler, revised companionway hatch and slides, elimination of virtually all topside teak, relocation of engine control panel to steering pedestal, fixed cockpit table (option?), new interior cabinetry with louvered teak fronts in lieu of sliding black Plexiglas, addition of hanging locker in aft cabin, revised galley counter with trash bin and elimination of fold-up counter extension, rubber flooring in galley area, revised and relocated electrical panel.