Sailboat Specifications
DefinitionsHull Type: | Fin w/spade rudder |
Rigging Type: | Masthead Sloop |
LOA: | 27.33 ft / 8.33 m |
LWL: | 22.17 ft / 6.76 m |
S.A. (reported): | 344.00 ft² / 31.96 m² |
Beam: | 9.18 ft / 2.80 m |
Displacement: | 5,180.00 lb / 2,350 kg |
Ballast: | 2,512.00 lb / 1,139 kg |
Max Draft: | 4.25 ft / 1.30 m |
Construction: | FG w/balsa cored deck |
Ballast Type: | Lead |
First Built: | 1970 |
Last Built: | 1972 |
# Built: | 167 |
Builder: | C&C Yachts |
Designer: | Rob Ball |
Auxiliary Power/Tanks (orig. equip.)
Make: | Universal |
Model: | Atomic 4 |
Type: | Gas |
Sailboat Calculations
DefinitionsS.A. / Displ.: | 18.44 |
Bal. / Displ.: | 48.49 |
Disp: / Len: | 212.22 |
Comfort Ratio: | 17.61 |
Capsize Screening Formula: | 2.13 |
S#: | 2.72 |
Hull Speed: | 6.31 kn |
Pounds/Inch Immersion: | 727.20 pounds/inch |
Rig and Sail Particulars
HELPI: | 33.00 ft / 10.06 m |
J: | 11.80 ft / 3.60 m |
P: | 28.50 ft / 8.69 m |
E: | 10.50 ft / 3.20 m |
S.A. Fore: | 194.70 ft² / 18.09 m² |
S.A. Main: | 149.63 ft² / 13.90 m² |
S.A. Total (100% Fore + Main Triangles): | 344.33 ft² / 31.99 m² |
S.A./Displ. (calc.): | 18.46 |
Est. Forestay Length: | 35.05 ft / 10.68 m |
Sailboat Links
Designers: | C&C Design |
Robert Ball | |
Builders: | C&C Yachts |
Associations: | C&C 27 Association |
Download Boat Record: |
Notes
The C&C 27 (MK I-IV) was one of C&C Yachts most successful model. Almost 1000 were built over a period of nearly 10 years.(Until 1982)
Mark I (hulls 1-167)(shown here)
Mark II (168-452), produced from 1972 to 1974.
Same dimensions as Mark I, except for a taller rig though with same sail area and other minor changes.
Mark III (hull #s 435-915) (1974-1981. (See C&C 27 MK III)
Taller rig than MKII. Hull stretched but beam is the same. Deeper keel with less ballast. Higher aspec rat. rudder. Same interior layout with minor changes.)
Wheel steering introduced as an option in 1976.
Diesel power offered as an option in 1978.
Later, the Yanmar SYP 12 diesel became standard.
Mark IV (916-972) ran from 1981 to 1982.
Same dimensions as Mark III, except the forestay was set back about four inches to accommodate a bow roller (resulting in a reduced 'J' measurement.)
Std. auxiliary power became Yanmar 2GM.
(The C&C 27 MK V is totally new design)
Another version (similar to C&C 27 MKI) called the TRAPPER 500 was built in the UK.
An 'unauthorized', most likely 'splashed', version was built in Germany called the KORNEUBURG 27 or K 27.
C&C 27 MK I available with a taller rig:
I: 35.00'/10.67m
J: 11.80'/3.60m
P: 29.80'/9.08m
E: 9.80'/2.99m
Total SA: (100%): 352.52 ft2/32.75 m2
Mark I (hulls 1-167)(shown here)
Mark II (168-452), produced from 1972 to 1974.
Same dimensions as Mark I, except for a taller rig though with same sail area and other minor changes.
Mark III (hull #s 435-915) (1974-1981. (See C&C 27 MK III)
Taller rig than MKII. Hull stretched but beam is the same. Deeper keel with less ballast. Higher aspec rat. rudder. Same interior layout with minor changes.)
Wheel steering introduced as an option in 1976.
Diesel power offered as an option in 1978.
Later, the Yanmar SYP 12 diesel became standard.
Mark IV (916-972) ran from 1981 to 1982.
Same dimensions as Mark III, except the forestay was set back about four inches to accommodate a bow roller (resulting in a reduced 'J' measurement.)
Std. auxiliary power became Yanmar 2GM.
(The C&C 27 MK V is totally new design)
Another version (similar to C&C 27 MKI) called the TRAPPER 500 was built in the UK.
An 'unauthorized', most likely 'splashed', version was built in Germany called the KORNEUBURG 27 or K 27.
C&C 27 MK I available with a taller rig:
I: 35.00'/10.67m
J: 11.80'/3.60m
P: 29.80'/9.08m
E: 9.80'/2.99m
Total SA: (100%): 352.52 ft2/32.75 m2
Sailboat Forum
View All Topics: | https://sailboatdata.com/forums/topic-tag/cc-27-mk-i/ |
Create Topic: | New Topic + |
Latest Topics: |